HMVL Series

SLIM TYPE
VERTICAL MOUNTING
  • Especially designed for crowded PCB's
  • Ceramic stand-off's
  • Very low Ohm with negligible inductance
Physical configuration
HTR TYPE POWER RATING at 70°C DIMENSIONS (mm) RESISTANCE RANGE  Wt Per PC (gms)
W
±1		 H
±1 		 D
±1		 P
±1		 MIN MAX
M2-L 2.5W 11.0 20.5 7.0 5.0 R004 R063 3.8
M4-L 4W 12.0 25.0 7.0 5.0 R004 R063 5.0
M5-L 5W 12.0 30.0 8.0 5.0 R005 R09 6.1
LV5-L 5W 13.0 25.5 9.0 5.0 R005 R09 6.4
M7-L 7W 12.5 38.0 9.0 5.0 R006 R10 7.5
LV10-L 10W 16.0 35.0 12.0 7.5 R06 R10 15.5
Electrical and Environmental Characteristics / Data
Test Performance Requirements
Resistance tolerance ±10% [K]; ±5% [J], ±2% [G]
Rated ambient temperature At 70°C full power dissipation
Insulation Resistance >1000M
Temperature co-efficient ± 200 ppm/°C to ±1200 ppm/°C
depending on resistance value.
Short time overload Max DR± 2%
Moisture Resistance Max DR± 5%
Load life Max DR± 5%
Ambient operating temperature range -25°C to +155°C
Flame Test Specifications laid down by UL have been met satisfactorily

Derating Curve

NOTE:
Type LV10-L can be provided with 1.0mm leads if required, please specify at the time of placing of the order.

NOTE:
Due to recent technological advances, the ceramic cases used may be steatite ceramic/corderite ceramic/high alumina ceramic depending on the nature of application. Hence the ceramic cases may be off-white/variations of brown and variations of grey; colours which are inherent to these ceramic materials.

 

Eurocap International Limited.   138 High Street,  Cheshunt,  Herts,  EN8 0AP  England.
Tel    +44 (0)1992 625407      Fax   +44 (0)1992 625420
Email eurocap@dial.pipex.com