HIP Series

SILICONE COATED 
WIRE WOUND RESISTOR
INDUSTRIAL APPLICATIONS
  • PCB type termination which can be easily snapped on and wave soldered on the PCB. 
  • Especially designed for use in B/W and colour Monitors. 
  • R10 to 5K6 
APPLICABLE STANDARDS -
EIA - RS - 155 - B, Char. G and JIS - C6401 Char. G.

Physical configuration



 
 
 

HTR TYPE POWER RATING at 25°C DIMENSIONS (mm) RESISTANCE RANGE  WT. PER PC (gms)
L
±1.5 		 D
±0.5 		 P
±1.5 		 H
±1 		 MIN MAX
H-3P  3W  20.0 6.5  12.5 18.5  R10 470R 2.6
H-5P 5W 25.0 8.5 15.0 22.5 R10 1K0 3.7
H-7P 7W 40.0 8.5 29.5 22.5 R10 2K7 5.6
H-10P 10W 54.0 8.5 43.0 22.5 R10 5K6 6.8
Electrical and Environmental Characteristics / Data
Test Performance Requirements
Resistance tolerance + 10% [K]; ± 5% [J]
and ±2%[G]
[< 1ohm ± 0.05 ohms]
Rated ambient temperature
[See derating curve]		 at 25°C full power dissipation
Insulation resistance >1000 M [Dry]
Temperature co-efficient ±200 ppm/°C [>10 Ohm]
±450 ppm/°C [<10 Ohm]
±600 ppm/°C [<1 Ohm]
Short time overload Max D R± [2% +0.05Ohm]
Moisture Resistance Max D R± [5% +0.05Ohm]
Load Life Max D R± [5% +0.05Ohm]
Ambient operating temperature range -40°C to +155°C

                                   

Eurocap International Limited.   138 High Street,  Cheshunt,  Herts,  EN8 0AP  England.
Tel    +44 (0)1992 625407      Fax   +44 (0)1992 625420
Email eurocap@dial.pipex.com