HCP Series

CERAMIC ENCASED WIRE WOUND RESISTOR
PC BOARD APPLICATION

3 W to 20 watts
Fire Retardant
R 10 to 12 K
Choice of PCB terminal stand-off heights which are adaptable to wave soldering

Physical configuration

HTR TYPE POWER RATING 70°C DIMENSIONS (mm) RESISTANCE RANGE WT. PER PC (gms)

L±1.5 W1±1 H1±1 P±2 H2±3 H3±0.5 W2±0.3 W3±0.2 MIN MAX

CP-3A 3W 24.5 9.5 9.5 12.0 15.0 4.5 7.3 1.4 R10 2K5 6.4

CP-5 5W 27.0
27.0 9.5
9.5 9.5
9.5 15.0
15.0 15.0
26.0 4.5
4.5 7.3
7.3 1.4
1.5 R15 3K1 6.9
8.0

CP-5A

CP-7 7W 35.0
35.0 9.5
9.5 9.5
9.5 22.5
22.5 15.0
26.0 4.5
4.5 7.3
7.3 1.4
1.5 R20 4K7 8.3
9.3

CP-7A

CP-10 10W 48.0
48.0 9.5
9.5 9.5
9.5 35.0
35.0 15.0
26.0 4.5
4.5 7.3
7.3 1.4
1.5 R33 7K3 10.8
11.6

CP-10A

CP-15 15W
(25° C) 48.0
48.0 12.5
12.5 12.5
12.5 32.5
32.5 15.0
26.0 4.5
4.5 7.3
7.3 1.4
1.5 R33 6K8 17.5
18.6

CP-15A

CP-15B 15W
(25° C) 48.0
48.0 12.5
12.5 12.5
12.5 32.5
32.5 15.0
30.0 5.0
5.0 10.0
10.0 2.7
2.7 R33 6K8 17.0
20.0

CP-15C

CP20 20W
(25° C) 63.0
63.0 12.5
12.5 12.5
12.5 48.0
48.0 15.0
26.0 4.5
4.5 7.3
7.3 1.4
1.5 R66 12K 22.9
23.8

CP20A

CP-20B 20W
(25° C) 63.0
63.0 12.5
12.5 12.5
12.5 48.0
48.0 15.0
30.0 5.0
5.0 10.0
10.0 2.7
2.7 R66 12K 23.5
26.5

CP-20C

HTR TYPE POWER RATING 70°C DIMENSIONS(mm) RESISTANCE RANGE WT.
PER PC(gms)

L±1.5 W1±1 H1±1 P±2 H2±2 H3±0.5 W2±0.3 T1±0.2 T2±0.2 T3±0.2 MIN MAX

CP-5Z 5W 27.0 9.5 9.5 15.0 22.0 4.5 7.3 1.1 1.5 3.5 R15 3K1 7.5

CP-7Z 7W 35.0 9.5 9.5 22.0 22.0 4.5 7.3 1.1 1.5 3.5 R20 4K7 8.5

CP-10Z 10W 48.0 9.5 9.5 35.0 22.0 4.5 7.3 1.1 1.5 3.5 R33 7K3 10.6

CP-15Z 15W 48.0 12.5 12.5 32.5 30.0 5.0 10.0 1.5 2.0 5.0 R33 6K8 19.5

CP--20Z 20W 63.0 12.5 12.5 48.0 30.0 5.0 10.0 1.5 2.0 5.0 R66 12K 25.0

NOTE: CP 15 /15 A, 15B, 15C AND 15Z can also be supplied in a pitch of 35 mm. Please specify if required.

Electrical and Environmental Characteristics / Data
Test	Performance Requirements
Resistance tolerance	± 10% [K] ; ± 5% [J] [< 1 ohms ± 0.05 ohms]
Rated ambient temperature [see derating curve]	Up to 10 Watt full power dissipation at 70° C 15 Watt / 20 Watt full power dissipation at 25° C
Di-electric withstanding voltage	Max D R [ 2% + 0.05 ]
Insulation resistance	> 1000 M [ Minumum ]
Temperature co-efficient	± 200 ppm/°C [>10 ohms] ± 450 ppm/°C [ <10 ohms] ±600 ppm/°C [ <1 ohm]
Short time overload	Max D R ± [ 2% + 0.05 ohms ]
Moisture resistance	Max D R ± [ 5% + 0.05 ohms ]
Load life	Max D R ± [ 5% + 0.05 ohms ]
Ambient operating temperature range	- 25° C + 155° C
Flame test	Specifications laid down by UL have been met satisfactorily
Temperature rise at PCB solder joint	Refer temperature rise chart

PCB DESIGN SUGGESTIONS
POWER RATING	HCP - A, B +C TYPES	HCP - Z TYPES	P
5W			15.0
7W			22.5
10W			32.5
20W			48.0

NOTE: Due to recent technological advances, the ceramic cases used may be steatite ceramic / corderite ceramic / high alumina ceramic depending on the nature of the application. Hence the ceramic cases may be off-white / variations of brown and variations of gray; colours which are inherent to these ceramic materials.

Derating Curve

NOTE:
Types CP 10/10A, CP 15/CP15A, B+C, CP 15Z & CP 20/CP 20A, B+C, CP 20Z may have cases with bottom bumps as per international practice.

Eurocap International Limited. 138 High Street, Cheshunt, Herts, EN8 0AP England.

Tel +44 (0)1992 625407 Fax +44 (0)1992 625420

Email eurocap@dial.pipex.com